How to Clean an Inground Pool

As a pool owner, you have an additional responsibility to handle because the pool and the water inside it must be kept clean for it to be safe to swim in. Therefore, in case you own an inground pool and you want to learn how to clean it properly, read the following lines.

Skim and brush

You have to skim the surface of your pool with a leaf skimmer on a daily basis if you want to ensure that you’re swimming in clean water. By doing this you ensure that there aren’t any harmful contaminants residing in the water. In addition, it won’t take long to finish skimming the water, and it’s an easy procedure as well. Just take the skimmer and use it to pull out debris that falls into the pool.

The pool must be brushed clean at least once per week. Unfortunately, this is a more tiring and time-consuming chore than skimming. Before you brush, make sure that you have skimmed the water to ensure there aren’t any large debris in it. Afterwards, proceed to use a brush to clean the sides, the stairs, and the ladders of the pool. Also, make sure that you put some force into this task in order to remove the grime that you will encounter.

Manage chemicals

Test your pool’s water pH level at least twice per week to ensure that the chemicals in the pool help maintain it clean. Buy a pH tester at a local supermarket to perform the test. The ideal pH level is between 7.2 and 7.6. In case the reading shows that the values are below or above these levels, use a pH reducer or a pH increaser to bring the water back to healthy levels of pH. When it comes to keeping an inground pool clean, you should use sanitizing chlorine tablets as well. You can purchase them online or at a hardware store. These tablets dissolve slowly and they release chlorine in order to kill the bacteria that is in your pool’s water. Also, make sure that you add them as often it’s instructed in the manual that they come with.

Make it easier for you with the iRobot Mirra 530 robotic pool cleaner

To save a lot of time and effort, simply use the iRobot Mirra 530 robotic vacuum cleaner for the task of cleaning the pool. If you spend the $1000 needed to buy it, you won’t have to lift a finger again to skim, brush, or vacuum the pool because this amazing device will do it for you. The robotic pool cleaner is able to thoroughly clean your pool’s water and surfaces of debris as small as 2 microns. It can filter up to 70 gallons of water per minute. It’s designed for to work for any type of inground pool. Due to the fact that it doesn’t rely on your pool’s main filtration system to run, it prolongs its life. In addition, this robotic pool cleaner maps the surface of your pool to find the shortest route to clean it. Therefore, it’s energy and time efficient as well.

Leave a Reply