How to Prolong the Life of Adhesive Products

When you invest in bespoke adhesive products for any purpose whatsoever, chances are you’d like them to last as long as possible. This usually applies to both the life of the unused adhesive in storage and the adhesives that have already been put to use for their specified purpose. According to the adhesive tape convertors, there are different ways by which the life of any adhesive product could be extended significantly. As with most things, the key is in taking a proactive approach, rather than just taking things for granted.

Purchased from a reputable manufacturer and used appropriately, custom adhesive products can improve output, take product quality to a higher level and cut down operational costs all at the same time. Therefore, it simply makes sense to look after this kind of investments, in order to get the most out of them. So as far as the professionals are concerned, it is not a great deal to ask to make sure they are both handled and stored in an appropriate way.

Here is a short overview of a few tips in terms of extending the life of adhesive products, before and after application:

First up, there’s very little that could have such a detrimental effect in pressure sensitive adhesives quite like moisture. When it comes to adhesives that are being put to use, any trace of moisture on the surfaces that will be bonded might have an impact on their ability to create a reliable bond. In terms of adhesive tape that is being stored, the room humidity levels could likewise compromise the general properties and integrity of the adhesive. Therefore, it’s crucially important to make sure that unless the adhesive has been specifically manufactured to be able to tolerate moisture, it needs to be kept away from traces of moisture at all times.

It is also the same story in terms of temperatures at both ends of the spectrum. In general, adhesive products will not be able to provide a reliable and strong bond if they are too cold when they’re applied. And if they happen to be stored in an environment that is especially cold, it might also impact their integrity and properties. Likewise, high temperatures might make it impossible for the adhesive to set properly and can damage unused adhesive products in storage. The instructions supplied with the adhesive will always specify the ideal storage conditions – guidelines that need to be followed to the letter.

Speaking of which, one of the most crucial rules in terms of prolonging the life of your adhesive products is that of consulting and adhering to the provided instructions in full.  Don’t make the mistake of assuming that simply because you know how to handle one adhesive tape correctly, you automatically know how to use another. Things could be extremely different from one adhesive to the next in terms of maximising their usable life and properties. So before even thinking about making a start, make sure to read the instructions from top to bottom.

For reasons that are relatively obvious, it’s also crucial to be mindful in terms of the actual surfaces and materials the adhesives are used with. While some will be manufactured specifically for use with some materials, there are others that are completely unsuitable for certain adhesive products. Take things for granted and choose the wrong adhesive to be used with the wrong surface and you risk a highly unreliable bond that might fail at any time.

It is also worth mentioning that any kind of physical pressure or impact inflicted on the adhesive itself prior to the use can have a negative impact on its ability to produce a reliable bond. When rolls of tape are torn, crushed, dented or damaged in any way, they can’t be trusted to perform as intended.

Last up, one of the most crucial rules to follow in terms of maximising the usable life of an adhesive product is to make sure that quality products are ordered in the first place. The simple fact of the matter is that the better the quality of the adhesive tape, the longer you can rely on it to be able to carry out its job.



Leave a Reply